Our Single-Out implant remover has been designed to remove failed implants.

Excessive force will cause damage to the teeth of the fixture removers.

The appropriate sized screw must be used within the failed implant.

The screw should tighten without movement and the adapter must be used with every procedure.

For tightening the screws, we recommend a torque of 50 to 60 newton cm.



Additional parts are available for purchase.

• Screw : 1.4  1.6  1.8  2.0  2.5mm  1-72 UNF.

• Fixture Remover / Tip : 20mm, 15mm,  Narrow,  Regular,  Ø5.0 Wide,  Ø6~8 wide.

Sterilization:

• Cleanse the instruments an ultrasonic cleaner.

• Wash it with distilled water and dry.

Caution:

Do not exceed 275° (175°C).

Do not submerge in any solution.

Do not autoclave for extended periods of time.

Extended autoclaving should not be confused with repeated autoclaving. Repeated autoclaving will not harm the product.